IPG Fiber 500W CNC laser skæremaskine til metalrør laser skæremaskine
ACCURL 500W Fiber Laser Cutting Machine can be used to cut a wide range of materials. Fiber lasers are more effective than other laser sources for cutting highly reflective materials e.g. aluminium alloys, cooper, brass...etc. Varied thicknesses (up to 22 mm of mild steel) can be cut with efficiency and quality. Productivity increases particularly with thin sheet metal with almost zero maintenance and 70% less cutting cost compared to CO2 laser cutting machine.
Applicable material:
Dedicated in cutting carbon steel(within 10mm), stainless steel, galvanized steel, electrolytic plate. silicon steel, aluminum, copper and other metal materials which thickness within 5mm.
Generelle egenskaber:
√ %70 low electricity consumption in comparison with CO2 Laser
√ Op til 0 hurtigere skæring
√ Høj stikeffektivitet (>)
√ Fleksibel strålegang
√ Vedligeholdelsesfri
√ Kobber, messing skæreevne
√ Høj udgangseffekt
√ Høj optisk kvalitet
√ Kompakt størrelse
√ Pålidelighed
Standardudstyr:
√ IPG YLS-500W Ytterbium Laser Resonator
√ Lineær drevne X-, U- og Y-akser
√ Høj stiv ramme
√ Empower eller FAGOR CNC-controller
√ Precitec skærehoved
√ Lantek software
√ Shuttle bord
√ Chiller enhed
√ Proportionalt gas- og rørsystem
√ Støvfilter
√ Kompressor
√ Transportbånd til skrot
Specifikation:
| Model | Smart KJG-1530 / IPG 500w | |
| Maksimal skærekapacitet | Blødt stål | 6mm |
| Rustfrit stål | 2.5mm | |
| Aluminium | 2mm | |
| Kobber | 1 mm | |
| Laser Power | YLR-500Watt IPG | |
| Max running speed | 40/min | |
| Arbejdsstykkets dimensioner | 1500 x 3000mm | |
| Hurtig gennemgang (X- og Y-akse) | 105 m / min | |
| Acceleration | 1.2G (12m/s2) | |
| Absolut positioneringsnøjagtighed | ± 0,03 mm | |
| Maks. bæreevne | 1550 kg | |
| Fume extractor | 1000 m3/hour | |
| Laser skærehoved | Ray Tools BM110 from Switzerland | |
| Feed rate | Programmable up to 30 m/min. | |
| Applied Materials | Thin mild steel, Stainless steel, Aluminum, Copper plate | |
